Search
The U220 encoder uses an encoder wheel to measure the mechanical rotation angle, which displays decimal system
Digital reading, encoder provides digital output simultaneously, can count in both positive and negative directions, no duplicates
Bit.
The rotating shaft drives the BCD code wheel to rotate, and the mechanical protrusion on the code wheel drives the elastic contact spring to lift up
Or press tightly to disconnect or conduct the contact spring from the electrical contact, thereby achieving the counting function.
The circuit board plug can read the BCD code count value to the upper computer.
| Electrical Parameters | |
|---|---|
| Rated power | Maximum current of 100mA, maximum voltage of 42V |
| Test voltage | 1000V |
| Electrical connections | 18 pin circuit board |
| Mechanical parameters | |
| digital display | Four digit, 0~9999 |
| Number size | Height 5.2mm, black background with white text |
| Drive shaft | Located at the bottom |
| Counting mode | Addition: Drive shaft rotates clockwise; Subtraction: counterclockwise rotation |
| Tightening method | Two through holes for external installation, with a diameter of 7mm |
| Maximum speed | 150 revolutions per minute (1 revolution=1 number); 60 revolutions per minute (1 revolution=10 counts) |
| torque | Approximately 40Nmm (1 revolution=10 pieces) |
| material quality | Shell: aluminum die cast; Top cover: aluminum die-casting |
| Protection level | IEC 60529 level IP 40 |
| working temperature | 0~60 ° C |
| weight | 500g |
Copyright ? Shenzhen DOT LINK Sensing Technology Co., Ltd 粵ICP備2023125867號(hào)